Installation; Care And Maintenance - Electrolux WK4PL10CN User Manual

6.

INSTALLATION

6.1 Positioning
Adequate air ventilation should be around
the appliance, to prevent overheating. To
achieve sufficient ventilation follow the in-
stallation instructions.
Install this appliance at a location where
the ambient temperature corresponds to
the climate class indicated on the rating
plate of the appliance:
7.

CARE AND MAINTENANCE

CAUTION! Unplug the appliance
before carrying out any mainte-
nance operation.
This appliance contains hydro-
carbons in its cooling unit; main-
tenance and recharging must
therefore only be carried out by
authorized technicians.
7.1 Periodic cleaning
The equipment has to be cleaned regu-
larly:
Do not pull, move or damage any
pipes and/or cables inside the
cabinet.
Never use detergents, abrasive
powders, highly perfumed clean-
ing products or wax polishes
to clean the interior as this will
damage the surface and leave a
strong odour.
• Clean the inside surfaces with a warm
water and baking soda solution. The
solution should be about 2 tablespoons
of baking soda to a quart of water.
• Clean the shelves with a mild deter-
gent solution.
• Wring excess water out of the sponge
or cloth when cleaning area of the con-
trols, or any electrical parts.
Climate class
SN
N
ST
T
• Clean the inside and accessories with
lukewarm water and some neutral
soap.
• Regularly check the door seals and
wipe clean to ensure they are clean
and free from debris.
• Rinse and dry thoroughly.
7.2 Periods of non-opera-
tion
When the appliance is not in use for long
periods, take the following precautions:
• disconnect the appliance from electric-
ity supply.
• remove all items.
• clean the appliance and all accesso-
ries.
• leave the door open to prevent un-
pleasant smells.
ENGLISH 11
Ambient
temperature
+10 °C to +32 °C
+16 °C to +32 °C
+16 °C to +38 °C
+16 °C to +43 °C