3. Product installation
Installation tools
3-1.
Screw driver
手
Screw driver
Note: Please refer to relevant installation instructions for specific use occasions.
3-2.Standard installation process
Check the barcode of the product outside the packing box and confirm
whether the model and temperament of the machine are the same as the model
purchased by the user.
Before opening the box, check whether the packing box is in
good condition, communicate with the user in case of any damage and
check the cause of damage when receiving the goods. Before the
packing can be opened, the packing must be confirmed to be good.
Place the cooking appliance on a stable countertop or on the
ground to ensure stable product placement;
Cut the packing tape on the packing box with the blade and open
the packing. Note that the blade does not extend too far into the inside
●
of the packing box (it is recommended that the sealing tape doesn't to
exceed 1mm). Do not use excessive force to prevent damage to the
●
internal product.
After removing the box, remove the foam cover with both hands
and then remove the whole machine on the water platform for the next
operation;
All packaging materials are environmentally friendly and
●
recyclable. Please dispose of these packaging materials in an
environmentally friendly manner to maintain a good environment;
Do not allow children to play with plastic film and packaging
boxes, which may cause choking accidents;
6