First Time Use; Setting The Clock; Timer Function - Danby DMW09A2WDB Owner's Manual

OPERATING INSTRUCTIONS

FIRST TIME USE

When the appliance is plugged in for the fi rst time, the display will
show "1:01".
When setting the cook timer, the appliance will return to standby
mode if there is no input within 25 seconds.
During operation:
• Press the Start/Stop button to pause the functioning.
• Press the Start/Stop button again to resume functioning.
• Press the Reset button to cancel the cooking program.
The appliance will beep at the end of a cooking program and will
continue to beep every 2 minutes until a button is pressed or the
door is opened.

SETTING THE CLOCK

The clock can be set as a 12 hour clock or a 24 hour clock.
To set the current time:
1. Press the Clock button once to choose a 12 hour clock. Press the
Clock button again to choose a 24 hour clock.
2. Use the number pad to enter the current time.
3. Press the Clock button to confi rm.
During operation, press the Clock button to see the current time.

TIMER FUNCTION

To set the timer function:
1. Press the Timer button, "TIMER" and "ENTER" will show on the
display and ":" will fl ash.
2. Use the number pad to enter the desired time to run the
microwave.
3. Press the Start/Stop button to begin operation.
7