Husqvarna S427 Operator's Manual page 2

WARNING! Failure to follow cautious
operating practices can result in serious
injury to the operator or other persons. The
owner must understand these instructions,
and must allow only trained persons who
understand these instructions to operate
the unit.
Each person operating the mower must be
of sound mind and body and must not be
under the influence of any mind altering
substance.
WARNING! Engine exhaust, some
of its constituents, and certain vehicle
components contain or emit chemicals
known to the State of California to
cause cancer and birth defects or other
reproductive harm.
WARNING! Improper assembly or
adjustments ca cause serious injury.
WARNING! Tragic accidents can
occur if the operator is not alert to the
presence of children. Never assume that
children will remain where you last saw
them.
Delivery
If you have purchased this product without
complete assembly and instruction by your
retailer, it is your responsibility to read and
understand all assembly instructions. If you do
not understand or have difficulty following the
instructions, contact the nearest Husqvarna
dealer for assistance.
To locate the nearest Husqvarna dealer, go to
www.husqvarna.com.
Before Operating the Unit
1. Make sure all assembly has been
properly completed.
2. Understand all safety precautions
provided in the manuals.
3. Review control functions and operation of
the unit. Do not operate the unit unless all
controls function as described.
4. Review recommended lubrication,
maintenance and adjustment instructions.
The safety instructions are based on
recommendations found in ANSI standard
B71.7-2014 (Draft).
IMPORTANT Refer to Engine Manual for
correct type and grade of fuel.
IMPORTANT To implement improvements,
specifications and designs can be altered
without prior notification.
Note that no legal demands can be placed
based on the information contained in
these instructions.
Use only original parts for repairs. The use
of other parts voids the warranty.
Do not modify or install non-standard
equipment to the unit without consent from
the manufacturer. Modifications to the unit
may cause unsafe operations or damage
the unit.
WARNING! Stop engine and allow
moving parts to stop before leaving
operator's position.
Safety Decals
The safety decals on the machine are visual
reminders of the important safety information
found in this manual. All messages found on
the unit must be fully understood and carefully
followed.
Always replace missing or damaged safety
decals. Replacement decals can be found in
the parts manual for the machine and ordered
from your dealer.
- 2 -