Husqvarna S427 Operator's Manual page 8

• Maintain or replace safety and instruction
labels, as necessary.
• Clear debris from movable parts, but only
when the power source is shut off. DO
NOT spray water to clean unit.
• Check to be sure all nuts and bolts are
tight to assure the equipment is in safe
working condition.
• For extended storage, clean unit
thoroughly. See engine manual for proper
storage.
• ALWAYS remove spark plug wire from
spark plug before inspecting or working on
this unit.
• DO NOT touch unit parts which might be
hot from operation. Allow parts to cool
before attempting to maintain, adjust or
service.
• Stop and inspect equipment if there is an
unusual vibration. Repair, if necessary,
before restarting. Never make adjustments
or repairs without first disconnecting the
spark plug wire.
• Check attachment components frequently.
If worn or damaged, replace with
manufacturer's recommended parts.
• ALWAYS keep protective structures,
guards, and panels in good repair, in place
and securely fastened. NEVER modify or
remove safety devices.
• Always shut off the power source while
repairing or adjusting the splitter except as
recommended by the manufacturer.
- 8 -