Networking Example - Devolo dsl+ 1100 duo User Manual

b
b
The file /etc/resolv.conf must be edited to ensure that the name resolution
(DNS) is executed correctly. Enter the IP address for the DNS server into this file,
e.g. nameserver 192.168.0.253 (only for Internet access)
Make sure that the IP address is the same as that for the dsl
cases the network router is the DNS server.
Please note that operating multiple network interfaces can potentially cause
problems with DNS and routing. We recommend the use of DHCP for the assign-
ment of IP addresses so that the DNS and gateway are adapted automatically.
2.3

Networking example

Networking of two workstations via Ethernet and USB; Internet access via the
dsl
Information for the configuration of the dsl
ing chapter Router configuration.
if IP addresses are to be assigned dynamically:
auto eth0
iface eth0 inet dhcp
if IP addresses are to be assigned statically:
auto eth0
iface eth0 inet static
address 192.168.0.1
netmask 255.255.255.0
gateway 192.168.0.253 (only required for Internet access)
+
1100 duo
|
Connection and installation
via Ethernet
via USB
devolo dsl + 1100 duo
+
1100 duo is available in the follow-
17
+
1100 duo. In most
|
devolo dsl+ 1100 duo
|