Tripwire Detection - Abus IPCS84510 User Manual Software

Threshold:
Sensitivity:
Percentage:

7.11.4 Tripwire detection

Enable tripwire:
Preview video:
Max. size:
Min. size:
Drawing:
Delete:
Virtual plane:
Direction:
Sensitivity:
The higher the value (0-10 seconds), the longer an
object has to stay in the area to be monitored in order to
trigger an event.
higher sensitivity allows smaller objects to be detected.
this value decides how much of an area must be
covered by an object in order to trigger an event. The
larger the value, the more of an area has to be covered.
The tripwire function detects whether an object crosses a
virtual line in the video image in a certain direction or both
directions. Then, an event can be triggered.
configure the virtual line here.
This function determines the maximum size of the object to be
detected. This is done by drawing a rectangle in the preview
video. The rectangle can be drawn anywhere in the preview
video.
This function determines the minimum size of the object to be
detected. This is done by drawing a rectangle in the preview
video. The rectangle can be drawn anywhere in the preview
video.
a virtual line appears in the preview video after the button is
pressed. It is then possible to click on this line and move it
using the mouse and the red corner points. "A" and "B"
indicate the directions.
delete the virtual line
number of available virtual lines: 4
definition of the direction(s) in which an object crosses and triggers
an event.
The higher the value, the earlier a crossing object is detected.
109