Advertisement
FRONT / REVERSE CAMERA INSTALLATION
FRONT/ REAR VIEW DISPLAY & PARKING LINE
a) Applicable for RC 1.0, RC 2.0
Reverse Camera Wiring (Remove Parking Line)
Reverse Camera
Do not cut the wires when using
as reverse camera.
Front Camera Wiring (Flip Viewing Display & Remove Parking Line)
Reverse Camera
Do not cut the wire when using
as reverse camera.
b) Applicable for RC 3.0
Front Camera Wiring (Flip Viewing Display & Remove Parking Line)
For Reverse Camera
Reverse Camera
Cut blue wire when using as reverse
camera to remove parking line.
Front Camera
Cut white & blue wires when using
as front camera to flip viewing
display & remove parking line.
Front Camera
Reconnect white wire when using as
front camera to flip viewing display
& remove parking line.
5
TROUBLESHOOTING
If any of the following problem occur, please resort to Troubleshooting for the possible
solutions. Consult Blaupunkt authorized dealer if problem persist.
Problem
Display monitor / car radio does not
show reverse view when reversing.
Reverse view does not show even
after restarting the display monitor/
car radio.
Reverse view does not show even
though power supplies of the reverse
light or the rear car plate light is
properly connected.
Solution
Restart the display monitor / car radio.
Examine if the power supplies of the reverse
light or the rear car plate light is properly
connected.
Examine if the power supply cables of the
reverse light or the rear car plate light is
damaged. Repair/replace if the cables are
damaged.
6
Advertisement
