Handling Precautions - Oppo Find X3 Pro Notes On Usage

Handling precautions

These precautions are provided to prevent the product from
malfunction and to ensure that performance can be fully
demonstrated. Thoroughly read these precautions to ensure correct
use.
■ Precautions common to main unit, internal
battery, charging equipment, au IC card (SIM
card), peripheral equipment
• Do not apply excessive force to the product during use. Be sure
not to put the product into a tightly packed bag or place a heavy
object on the product in a bag. Sitting on the product in your
pocket may cause damage of the display, internal circuit board,
etc. or other malfunction.
Also, doing so with an external device connected to the external
connection jack may cause a damage of connector or malfunction.
Such damage and malfunction are not covered by the warranty,
even if there is no external damage.
• To ensure waterproof property (equivalent to IPX8 and IP6X) of the
product, use with the au IC card tray firmly installed.
However, that does not mean the operations in every possible
condition are guaranteed. Do not allow foreign object such as
liquid or powder dust to enter into the product or do not splash
water on the specified charging equipment. Do not open/close the
au IC card tray in the rain or when water droplet is adhered on it.
Water may enter inside of the product and cause corrosion.
Malfunctions determined that are caused by such water wetting as
result of inspections are not covered by the warranty.
• Do not use the following items in extremely hot, cold or humid
places. (Use in a range of ambient temperature 0
35% to 85% in humidity. However, temporary use is possible in a
℃
range of 36
- OPPO Find X3 Pro main unit
- au IC card (installed to the OPPO Find X3 Pro main unit)
• Do not use the following items in extremely hot, cold or humid
places. (Use in a range of ambient temperature 5
35% to 85% in humidity.)
- Specified charging equipment
- USB Type-C data cable (sample)
- Earphone (sample)
- Peripheral equipment
• Do not use in places subject to lots of dust or vibration. May cause
a malfunction.
• Clean the external connection jack with dry cotton swabs etc.
every now and then. Soiled jacks may cause poor connection.
Be careful not to deform the external connection jack by applying
force when doing it.
℃
to 40 .)
℃
to 35
℃
to 35
Safety Precautions
℃
and
℃
and
23