Clearing Programs - Denon DCM-5000 Operating Instructions Manual

Clearing Programs

Programs can be cleared while stopped in the program mode.
2 Clearing CDs (or tracks) in the middle of a program
1
2
* If CLEAR is pressed without
performing the operation in step 1,
the first step is cleared.
2 Clearing the entire current program
1 Select the program number.
(Refer to pages 18 and 19.)
2
Adding to the end of programs.
Follow steps 2 to 5 under " Programming from the main unit " (page 18) or steps 3 to 8 under "Programming from the remote control
unit" (page 18) to add CDs (or tracks) to the end of the program.
Turn the jog dial (on the remote control unit press the
backward) and display the step to be cleared.
Press the CLEAR button.
• The entry for the displayed step number is cleared and the first step is displayed.
Press the CLEAR button continuously until " ALL CLEAR " is displayed.
• The entire current program is cleared and " NO ENTRY " appears on the display.
ENGLISH
or button) to move forward (or
21