12. Replace the two screws (M2x3) that secure the eDP cable bracket to the system board.
Next steps
1. Install the
WWAN
card.
2. Install the
WLAN
card.
3. Install the
base
cover.
4. Install the
microSD
card.
5. Install the
SIM
card.
6. Exit
Service
Mode.
7. Follow the procedure in
Display bezel
Removing the display bezel
Prerequisites
1. Follow the procedure in
2. Enter
Service
Mode.
3. Remove the
SIM
card.
4. Remove the
microSD
5. Remove the
base
cover.
6. Remove the
WLAN
card.
7. Remove the
WWAN
card.
8. Remove the
display
assembly.
About this task
The following images indicate the location of the display bezel and provide a visual representation of the removal procedure.
After working inside your
Before working inside your
card.
computer.
computer.
Removing and installing components
75