Table of Contents
Advertisement
6
EN
IINSTALLATION
INSTRUCTIONS
ELECTRICAL CONNECTION
Before connecting the refrigerator to
the mains power supply, make sure
that:
The supply voltage corresponds to the
specifications on the data plate on the
front of the oven.
The mains supply has an efficient
ground connection complying with all
applicable laws and regulations.
Correct grounding is a legal require-
ment. If the appliance is not pre-fitted
with a power cable and/or plug, use
only suitable cables and plugs capable
of handling the power specified on the
appliance's data plate and capable of
resisting heat. The power cable should
never reach a temperature of 50 °C at
any point along its length.
If the appliance is to be connected
directly to mains terminals, fit a switch
with minimum aperture of 3 mm
between the contacts. Make sure that
the switch is of sufficient capacity for
the power specified on the appliance's
data plate, and compliant with applica-
ble regulations. The switch must not
break the yellow-green earth wire. The
socket or switch must be easily reach-
able with the refrigerator fully installed.
!
Attention! Installation and electrical
connection must be executed by a
qualified expert only.
!
Attention! The manufacturer
declines all responsibility for
damage or injury if the above
instructions and normal safety
precautions are not respected.
Advertisement
Table of Contents
