Kaiser K 64 Series User Manual page 20

3 6 4
1 2
°C
I4 09
°F
1 2
6 4
O8
20
5 7
°C
°F
5
°C/°F
EN
ELECTRONIC
PROGRAMMER
INTELLIGENT SYSTEM
• Press the key 1 and hold it for 3
seconds to turn ON the appliance.
• Press the key 1 and hold it for 3
seconds again.
The appliance goes to the stand-by
mode.
• Press the key 2 to turn ON/ OFF the
light.
In stand-by mode, the key is inactive.
• Press the key 3 once to switch
between upper and lower zones to
set temperature. Press the key once,
the LED display in chosen zone flash
regularly. Press up and down key to
set temperature. Press the key
again; switch the zone to set
temperature.
• Press once a key 4 to increase or 5
to decrease temperature, a chosen
LED display 6 flashes showing a
current set temperature. Continue
pressing to adjust set temperature in
1° step.
After 5 seconds without pressing, a
new temperature set saved. LED
display returns to show an actual
temperature.
• Press the key 7 once to switch
b e t w e e n C e l s i u s / F a h r e n h e i t
temperature indication.