Kenwood TK-3217 Service Manual page 21

TK-3217
Note: If the packing of the SP / MIC does not come to the
correct position after attaching the chassis to the case
assembly, reposition the packing with your fingers.
■ LCD ASSY Installation Procedure
1. Insert two tabs on the left side of the illumination guide
into the matching slots of the mounting hardware
2. Insert the tab on the right side of the illumination guide into
the mounting hardware using a pair of tweezers
press the illumination guide down until it snaps into place
c
.
3. Ensure that the tab of the illumination guide is fully inserted
into the mounting hardware.
20
DISASSEMBLY FOR REPAIR /
z
x
2
注∶把机架安装到机壳上后，如果 SP/MIC 不在正确的位置的
话，请用手指调整到正确的位置。
3
4
4
■ LCD 组件安装程序
1. 在照明导向器左侧插入2个卡头到与固定硬件相吻合的槽里。
z
.
2. 使用小钳子的钳头在照明导向器右侧把卡头插到安装硬件
x
，然后向下按照明导向器直到它进去
, then
3. 接着照明导向器全部插入到固定硬件。
1
1
3
Ensure that the tab of the illumination guide
is fully inserted into the mounting hardware.
接着照明导向器全部插入到固定硬件。
维修拆卸
c
。