Deciding on a Mode for Initial AirStation Configuration
Wired Connection (recommended)
◗
Wireless Connection
◗
Wireless PC
Step 3 - If not already done in the previous step, connect your
computer to the AirStation
Wired Configuration
◗
Buffalo recommends using a wired connection, meaning your computer is
physically connected to the AirStation with a CAT5 straight cable plugged into
one of the four LAN ports. This type of setup will eliminate possible setup
problems due to any issues with the wireless adapter on the computer being
used to configure the AirStation.
Cable/DSL
LAN Cables
(Straight CAT 5)
Wired PC
Wired PC
4
Internet
Modem
LAN
Cable
Wireless
Laptop
AC Power