Buffalo AirStation MIMO WZR-G108 Quick Setup Manual page 10

AOSS (AirStation One-Touch Secure System ™ ) is a simple, one-touch setup for
connecting wireless clients to an access point while setting up the most secure
possible connection. Users no longer need to worry about choosing the proper
security protocols, IP addresses, or ESS-ID's. The intelligence of AOSS
determines the most optimal connection and configures itself in seconds.
Note: AOSS automatically creates a secure connection between your AOSS Access Point
and client. You must have a Buffalo AOSS enabled wireless client device to use the AOSS
features of your AOSS Access Point/Router.
Configure your WZR-G108's network connection by referring to the above
◗
mentioned instructions.
Once the WZR-G108 has been configured, follow the directions to install
◗
your wireless client device and its drivers if necessary. Certain wireless client
adapters require client software to configure them. If your device has a Client
Manager, then install it as well.
Note: If the wireless client adapter is
installed on a PC, then the AOSS client
manager will need to be installed as
well. If your wireless client adapter is a
standalone device that does not require a
PC, then just power up the device.
Standalone Devices:
Ethernet Converters and
Access Point Bridges
Client Manager Devices:
CardBus, USB, and PCI Adapters
Standalone
AOSS Device
10
Client Manager
Device