Advertisement
Available languages
Available languages
• Insert the whisk into the adapter fitting (Fig. 4.1). Fit the adapter fitting to the mo-
tor unit by turning it in the direction of the arrow (Fig. 4.1).
• Put the food into a recipient and start the appliance. For optimum results, move
the whisk clockwise (Fig. 4.2).
• Remove the whisk accessory and release the adapter fitting (Fig. 4.3).
Note 1: Do not work at high speeds even with the turbo function with this acces-
sory attached, as this would cause defects in the whisk (spinning its wires).
• Note 2: To free the whisk from the adapter fitting, pull the ring on the whisk.
Safety thermal protector:
• The appliance has a safety device, which protects the appliance from overheating.
• If the appliance turns itself off and does not switch itself on again, disconnect it
from the mains supply, and wait for approximately 15 minutes before reconnec-
ting. If the machine does not start again seek authorised technical assistance.
Cleaning
• Disconnect the appliance from the mains and let it cool before undertaking any
cleaning task.
• Clean the equipment using a damp cloth with a few drops of washing-up liquid
and then dry.
• Do not use solvents, or products with an acid or base pH such as bleach, or abra-
sive products, for cleaning the appliance.
• Do not submerge the appliance in water or any other liquid, or place it under a
running tap.
• During the cleaning process, take special care with the blades, as they are very
sharp.
• It is advisable to clean the appliance regularly and remove any food remains.
• If the appliance is not in good condition of cleanliness, its surface may degrade
and inexorably affect the duration of the appliance's useful life and could become
unsafe to use.
• The appliance is suitable for cleaning in hot soapy water or in a dishwasher (using
a soft cleaning program):
- Whisk
- Liquidiser attachment.
- Goblet
- Measuring cup
• The draining/drying position for washable parts in dishwashers or after washing
EN
16
Advertisement
