Table of Contents
Advertisement
Problem
One or more residual
heat indicators is flash-
ing.
The sensor buttons are
over-sensitive or do not
react at all.
Alternating with a
number flashes in the
timer display.
Frequently Asked Questions
Possible cause and solution
There was a power failure during operation or when
residual heat was present.
You called the programming function while residual
heat was still present.
The sensitivity level of the sensor buttons has
changed.
Ensure that the cooktop is not in direct sunlight or
strong artificial light and that the area around the
cooktop is not too dark.
Make sure that there is nothing covering the sen-
sor buttons or the cooktop.
Take any pans off the cooktop and wipe away any
food deposits.
Interrupt the power supply to the cooktop for ap-
prox. 1 minute.
If the problem persists after power is restored,
please contact Miele Service.
The overheat protection was triggered.
See "Overheat protection."
or
The fan is blocked or defective.
Make sure it has not been blocked by something
like a fork. Remove the cause of the blockage.
If this fault message continues to appear in the
display, contact Miele Service.
and other numbers
There is a fault in the electronic module.
Interrupt the power supply to the cooktop for ap-
prox. 1 minute.
If the problem persists after power is restored,
please contact Miele Service.
47
Hide quick links:
Advertisement
Table of Contents
