Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Rompa Manuals
  4. Projector
  5. 23008
  6. Manual

Rompa 23008 Manual

Led100 projector for water environment
Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
1. Product Name
LED100 Projector for Water Environments
2. Product Code
23008
3. Colour
White
4. Brief Description
Lower voltage projector adapted for environments such as bathrooms.
5. Contents
 1 x LED100 Projector
 1 x 85mm lens (attached)
 1 x 12V DC Transformer with 1.5 metre lead
6. Snoezelen® Stimulations
 Sight

Advertisement

loading
Need help?

Need help?

Do you have a question about the 23008 and is the answer not in the manual?

Questions and answers

Related Manuals for Rompa 23008

Summary of Contents for Rompa 23008

  • Page 1 1. Product Name LED100 Projector for Water Environments 2. Product Code 23008 3. Colour White 4. Brief Description Lower voltage projector adapted for environments such as bathrooms. 5. Contents  1 x LED100 Projector  1 x 85mm lens (attached) ...
  • Page 2 This product looks most effective in a smaller, darkened environment. Projections can be made even more visually striking when used with compatible products. 8. Compatible ROMPA® Products The LED Projector must be used with an accessory in the rear gate, typically a Wheel Rotator such...
  • Page 3 If the carton appears damaged, carefully check the shipping carton for damage and be sure all accessories necessary to operate the unit have arrived intact. In case of any difficulties, please contact ROMPA®.  It is highly advisable that you read the full instructions before use. Keep the instructions in a safe and accessible place so that can be read as required.
  • Page 4 12. Technical Specification Size: 21.5L x 12.5W x 8cmH (27cmH with bracket) Power Consumption: 24 Watts maximum Voltage: 100 – 240V adapter (1.5m lead) Output: 12V ~ output current: 750mA maximum Light: 20W LED Module Average LED Module life 100,000+ hours Weight: Projector 1.67kg, projector and transformer 1.85kg, packed: 2.4kg Lumens:...
  • Page 5  Consider the following projection distances:...
  • Page 6 Use the projector’s bracket to mount the projector in any of the following ways:  Ensure that the projector is secured to a surface or structure able to bear the weight of the projector and accessories, via the bracket fitted using suitable central bolt (minimum: 14mm M10 x 20mm), washers and attachments.
  • Page 7 Place a suitable accessory in the projector e.g. Wireless Wheel Rotator (22614 Magnetic) with an Effect Wheel. Slide the Wireless Wheel Rotator into the rear gate runners (the main effect goes into the rear gate runners, with Distortion Wheels etc. in the front gate runners). Once the Wireless Wheel Rotator is in place, operation will begin instantly.
  • Page 8 Do not touch the LED module - it may fail if touched.  Carefully re-fit the cover and replace all four screws.  For any repairs, please contact ROMPA®. Do not attempt to repair this product yourself.  Once this product is eventually exhausted, please dispose of it responsibly and appropriately.

  • Page 9: 15. Troubleshooting

    This can be located as indicated below: In the unlikely event of product failure, please contact us. Further copies of these instructions can be downloaded at www.rompa.com We hope you find our instructions invaluable. If you have any suggestions for improving them further your comments will be greatly received –...