Table of Contents
Advertisement
Quick Links
1. Product Name
ROMPA® Interactive Projection
2. Product Code
20063
3. Colour
Not applicable
4. Brief Description
An incredible multimedia visual display system that projects amazing interactive special effects and
activities directly onto an 'interactive floor'. Users control dynamic interactive displays with simple
gestures and body movement. Movement is rewarded with engaging experiences and captivating
images.
5. Contents
1 x PC with keyboard
1 x Projector with Remote Control
1 x Camera Tracking System
1 x Vinyl Floor (which can be fitted to the floor or left loose)
1 x VGA cable to connect PC to the projector (usually 5 metres)
Advertisement
Table of Contents
Related Manuals for Rompa 20063
Summary of Contents for Rompa 20063
- Page 1 1. Product Name ROMPA® Interactive Projection 2. Product Code 20063 3. Colour Not applicable 4. Brief Description An incredible multimedia visual display system that projects amazing interactive special effects and activities directly onto an ‘interactive floor’. Users control dynamic interactive displays with simple gestures and body movement.
-
Page 3: Detailed Description
As a non-contact resource, once installed, it is also perfect for those with challenging behaviours. Multiple easy-to-customise templates are included, with further effects available to build your own ‘library’. The ROMPA® Interactive Projection can be permanently installed by ROMPA® in your Snoezelen® room. - Page 4 OPERATION Press the power button on the PC. Using the remote control, turn the Projector on. Switch the keyboard on. Remember to switch this off after use to preserve battery life. When the system starts up, you will see the Magic Carpet control panel:...
- Page 5 If your system does not automatically launch the Magic Carpet software and you only see the Desktop, locate the software icon and double-click it: Note: depending on how your system is configured, it may launch straight into an App. If this is the case, press escape once to get back to the control panel. If the shortcut icon on the Desktop gets deleted / disappears, a new shortcut can be created by navigating to: C:\Program Files\Magic Carpet\...
- Page 6 Look for the section that says “Computer”. Press “1” once and wait for a few seconds. If this doesn’t work, try pressing “2” and wait for a few seconds. Use the keyboard to control the system. The trackpad on the right of the device works in the same way as a laptop track pad with left and right mouse buttons underneath.
- Page 7 Select an App by clicking once on it with the Left mouse button. Navigate to the right and click the Start button ONCE and the chosen App will run. Full lists of apps can be found later in these instructions. To exit an App, press the Esc key ONCE to return to the Control Panel: Note: Pressing the Esc key more than once when exiting an App will close the software.
- Page 8 Navigate to the Start button at the bottom left of the display: Click Shut Down: Make sure the PC has shut down. Using the Projector Remote, press OFF - ONCE: Press once to enter shut down mode and once again to confirm shut down. You could also press ‘Enter’...
-
Page 10: Technical Specification
11. Safety Always supervise the use of this product. 12. Technical Specification Projector: 5000 hours lamp life Mat: The size of the mat the size is determined by the ceiling height and projector lens throw ratio. The standard projector throw is 1.3:1 – that means that you can work out the image size by dividing the ceiling height by 1.3 ... -
Page 11: Installation
13. Installation The kit supplied is intended to accommodate the safe installation of the projection system on many of the ceiling types which might be found including the 600 x 600 tee bar suspension system. Suspended ceilings: the M8 x 100 bolt is attached to the corner of the tile and the connector clip to extend the threaded rod to the structure above. - Page 12 RSJ or steel section: an alternative method of suspending the tile from an RSJ or steel section is by using the 250mm angles to clamp the upper and lower surfaces of the structural member. Plaster ceiling: when suspending the tile from a plaster ceiling first assemble the 650mm Z bearers on to the tile with the M8 x 16 button head bolts.
-
Page 13: Care And Maintenance
Location of any power sockets is important to ensure that the PC and its components can be powered. ROMPA usually place the computer cabinet near the interactive floor area at an accessible level. The projector and computer are always wired up on a constant mains power supply (usually using the fish key switch). - Page 16 Further copies of these instructions can be downloaded at www.rompa.com We hope you find our instructions invaluable. If you have any suggestions for improving them further your comments will be greatly received – please contact us at producthelp@rompa.com ROMPA INTERACTIVE FLOOR PROJECTION 20063, March 2015...
Need help?
Do you have a question about the 20063 and is the answer not in the manual?
Questions and answers