Table of Contents
Advertisement
What's In the Kit
ACRYLIC ROLL-ON BASECOAT RENDER
1 x 5L MAC 'Rustic Roll-On' Acrylic Render (White Basecoat)
This is the membrane coating that you will apply over the outer dome, once the oven has been completely
cured and all moisture has been driven out. It gives the dome a good waterproof basecoat which can be rolled
over with more roll-on render, or other similar exterior acrylic coating. It can be tinted at most paint stores.
OVEN DOOR
The final part of your kit is our Stainless Steel oven door, coated in a satin black finish. The handles are
beautiful oiled hardwood, with solid stainless steel rings top and bottom. The door comes with a vacuum
sealed temperature gauge accurate to 550°C (packed inside the bag of extras within the door box).
EXTRA ITEMS PROVIDED
•
Plastic Formwork for Sub-Floor Heat Bank
•
Plastic Strips to support the Timber Formwork
•
2 Rolls of Chicken Wire & Galv Tie Wire
OPTIONAL EXTRAS
WATERPROOFING SYSTEM
Roll of 150mm wide Aluminium Flashing and 1 x Cartridge of Sikasil High Temperature Silicone
To prevent rain being drawn into the oven from beneath the outer dome (the perlite render layer), install our
waterproofing system around the oven perimeter prior to rendering. Only needed for outdoor installations.
HIGH TEMP SPRAY PAINT FOR PRECAST FLUE GALLERY
Spray can of PPG Temptec 328 in Satin Black. Great for painting the Flue Gallery to make it look sharp.
OVEN WALL TEMPERATURE PROBE WITH THERMOWELL
250mm Temperature Gauge with Stainless Steel Thermowell that can be mounted through the oven wall.
POLISHED GRANITE LANDING
Polished Granite sections cut to fit around the Vent area, giving you somewhere to pull out heavy roasting trays
to check on your cooking. Also an important surface to allow you to use your Oven Door as a Draft Door.
•
24 x 125mm Nails
•
25 x 100mm Phillips Head Screws
•
2 x Long Sleeve 'Vet Examination' Gloves
17
Advertisement
Table of Contents
