Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
WARNING!
THIS APPLIANCE HAS TO BE INSTALLED BY A QUALIFIED INSTALLER.
Improper installation, adjustment, alteration, services, or maintenance can cause injury or property damage. Consult a
qualified installer, service agent, or the gas supplier.
IMPORTANT: The use of suitable protective clothing/gloves is recommended when handling, installing of this appliance.
CAUTION !
Some cabinets and building materials are not designed to withstand the heat produced by the normal safe operation of the appli-
ance. Dis-coloration or damage, such as delamination, may occur.
To prevent possible damage to cabinets and cabinet finishes, use only materials and finishes that will withstand temperature up to
190°F (88°C), and that are moisture resistant.
When cabinets are covered with laminates, an appropriate heat-resistant adhesive must be used.
Consult your cabinet manufacturer for proper specifications.
The cabinet must have solid sides, back and bottom. The bottom must be solid either at floor level or with the bottom edge of the
cutout. Any openings around the gas or electrical outlets must be sealed. All cabinet openings must be sealed at the time of instal-
lation to prevent drafts. Drafts will affect safe use of the oven.
TOOLS NEEDED FOR INSTALLATION
T-handle
Angled
Tape
Screwdriver
Wrench
wrench
hexagon key
Pencil
measure
Suitable protective
Adjustable
Adjustable
Drill
gloves
wrench
pliers
15
Hide quick links:
Advertisement
Table of Contents
