Energy Guide; Favorite - Bosch SPV68B53UC User Manual

Hide thumbs Also See for SPV68B53UC:
Table of Contents

Advertisement

5.1 Energy Guide
The Energy Guide label was
based on the Normal soil sensing
cycle.
The unit was tested without any
rinse aid (liquid) in the rinse aid
dispenser. A single dose of deter-
gent was inserted into the deter-
gent dispenser, with no detergent
being used in the prewash. The
unit was not subjected to trun-
cated testing per the definitions in
the test procedure. We recom-
mend that dish loads such as the
one in the energy certification test
have the rack position set in the
highest position. Recommended
for daily, regular or typical use to
completely wash a full load of nor-
mally soiled dishes.
5.2 Favorite
With this function, you can save a
combination of a Cycle and an
Option.
You can save the selected Cycle
and Option combination via the
Home Connect app or on the ap-
pliance.
The pre-rinse cycle is pre-pro-
grammed to this button and is fine
for all types of dishware. The dish-
ware is rinsed with cold water.
Tip: You can use the Home Con-
nect app to download additional
Cycles and Options and save
them.
1
Save Favorite
appliance.
Open the appliance door.
1.
Press
2.
Press the right cycle button.
3.
Press the button for the rele-
4.
vant options.
1
Depending on the appliance specifications
on the
⁠ .
Press Favorite button for 3 sec-
5.
onds.
a The selected cycle and option
will flash.
a The Favorite button flashes.
a The program combination is
saved.
Tip: To reset the cycle, either use
the Home Connect app or reset
your appliance back to the factory
settings.
→  "Overview of the basic set-
tings", Page 29
6 Options
Options
You can find an overview of the
Options
options that can be selected here.
Different options, which can be
found on the control panel of your
appliance, are available depend-
ing on the appliance configuration.
Option
Use
¡ For a better drying
result, the final
Extra Dry
rinse temperature
is increased and
the drying phase
extended.
¡ Especially suit-
able for drying
plastic parts.
¡ There is a slight
increase in energy
consumption and
the run time is ex-
tended.
Options en-us
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents