Opening The Appliance Door; Switching On The Appliance; Setting A Cycle; Setting Options - Bosch SPV68B53UC User Manual

the door has to be closed within 4
seconds, otherwise the operation
will be paused.
Note: This function cannot be de-
activated.
Requirements
¡ Pressing Start to begin a wash
cycle
¡ Setting Delay time and press-
ing Start
¡ Opening the door while Delay
time is active
¡ Opening the door during a
wash cycle.
Press ⁠ .
1.
Close the door.
2.
a The wash cycle will resume.
12.2 Opening the
appliance door
Open the appliance door.
▶
12.3 Switching on the
appliance
Press
▶
The standard program is set by
default.
If you do not perform any ac-
tions on the appliance for 10
minutes, it will automatically
switch off.
12.4 Setting a cycle
To adjust the wash cycle to the
soiling level of the dishware, se-
lect a suitable cycle.
Press the right cycle button.
▶
a The cycle is set and the cycle
button flashes.
a The remaining run time of the
cycle appears on the display.
⁠ .
Basic Operation en-us
12.5 Setting options
You can set options to complete
the chosen cycle.
Note: The available options de-
pend on which cycle is selected.
Press the button for the rele-
▶
vant option.
a The option is set and the option
button flashes.
12.6 Setting the electronic
delay time
You can delay the start of the
wash cycle by up to 24 hours.
Press ⁠ .
1.
a "h:01" appears on the display.
Use to set the required
2.
start time for the wash cycle.
Press ⁠ .
3.
a This activates the electronic de-
lay time.
Tip: To deactivate the electronic
delay time, press
until "h:00" appears on the dis-
play.
12.7 Starting the wash
cycle
Press .
▶
a The wash cycle has ended
when the display shows
"0h:00m".
Notes
¡ If you want to add more dish-
ware while the appliance is run-
ning, do not use the collecting
tray as a handle for the upper
rack. You might touch the par-
tially dissolved tablet.
¡ You can only change a cycle in
progress if you can cancel it
first.
→ "Terminating the wash cy-
cle", Page 28
repeatedly
27