Casio Casiotone CT-S400 User Manual page 96

Inserting an Intro
The intro you insert at the beginning of a song is followed by the basic pattern (V1) or variation pattern
(V2).
1.
Press RHYTHM.
This displays the currently selected rhythm number and name.
2.
Rotate the dial to select the name of the rhythm whose setting you want to
configure.
3.
Press INTRO.
This displays "I >V1".
• "I >V1" indicates that "V1" starts to play following the introduction.
• To remove an intro, press VARIATION.
• If you press INTRO while a rhythm is playing, the rhythm changes to the intro from the next
measure.
4.
To change the rhythm pattern that is played after the intro from the basic pattern
(V1) to the variation pattern (V2), press INTRO again.
This displays "I >V2".
• Press INTRO again to return to "I >V1".
5.
Press a.
This plays the intro. After the intro is complete, the rhythm pattern you selected in step 4 starts to
play.
• Pressing VARIATION while an intro is playing interrupts the intro play up to the current measure
and then plays the rhythm pattern you specified in step 4.
• To play the other rhythm pattern while the intro is playing, press VARIATION twice in quick
succession.
EN-95
Playing with a Rhythm Backing