Casio Casiotone CT-S400 User Manual page 38

■ Adjusting the Note Sustain Time
Use the procedure below to change the sustain time when sustain is enabled.
1.
Press TONE.
This displays the tone screen.
2.
Long-press SUS.
This displays the sustain screen, which shows setting items for the UPPER1 part sustain time.
3.
If required, press UPPER1, UPPER2, and LOWER to select the part whose setting
you want to configure.
4.
Rotate the dial to change the setting.
• You can set a sustain time within the range of 0 to 9.
• After you rotate the dial once to select a value, you can change the value further using – and +.
• To return the setting to its initial default, press – and + at the same time.
• To go back to the previous screen, press BACK.
• Setting a value of "0" causes the indicator for the applicable part ("U1", "U2", "L") to disappear
from the display.
5.
To exit the setting operation, press EXIT.
• You can also display the sustain screen by pressing MENU and then SUSTAIN.
• For details about parts, see "Layering and Splitting
EN-37
Controlling the Sound of a Performance
Tones" (page EN-52).