Casio Casiotone CT-S400 User Manual page 82

Selecting a Song on a USB Flash Drive
You can use the same operations as those for built-in songs to play back MIDI files* stored in the
"MUSICDAT" folder on a USB flash drive. For information about the procedure for saving a MIDI file to
a USB flash drive, see
* Standard MIDI files (SMF format 0/1) and CASIO MIDI files (CMF format)
1.
Insert the USB flash drive into the Digital Keyboard's USB TO DEVICE port.
• When you perform a USB flash drive operation or turn on the Digital Keyboard while a USB flash
drive is plugged in, the Digital Keyboard initially needs to perform a "mounting" process to prepare for
data exchange with the USB flash drive. Digital Keyboard operations are momentarily disabled while
a mounting process is being performed.
• "MOUNTING" is shown on the display while the USB flash drive mounting process is being
performed.
• Do not attempt to perform any operation on the Digital Keyboard while a mounting process is in
progress.
• After the mounting process is complete, it may take up to 10 or 20 seconds or even longer before you
can perform any operation on the Digital Keyboard. "LISTING" is shown on the display during this
period of non-operation.
• The USB flash drive mounting process needs to be performed each time it is connected to the Digital
Keyboard.
2.
Rotate the dial to select a song.
• Song numbers are assigned automatically in sequence to MIDI files on the USB flash drive. The
files are sorted in file name sequence. The first MIDI file (file name sequence) is assigned song
number 179.
• Certain songs can take time to load. During a load operation, the message "LOADING" is displayed
along with a progress percentage.
• Only numbers that are allocated to the USB flash drive can be selected.
• Only songs that can be displayed in the USB flash drive song category can be selected.
"Saving Digital Keyboard Data to a USB Flash
USB TO DEVICE port
USB flash drive
EN-81
Playing a Built-in Song
Drive" (page EN-151).