Klarstein Kingsville XL Manual page 51

Problem
Burner will not light using
ignitor.
Possible Cause
Gas issues:
Trying to light wrong
burner.
Burner not engaged with
control valve.
Obstruction in burner.
No gas flow.
Vapour lock at coupling
nut to gas cylinder.
Coupling nut ad gas
cylinder valve not fully
connected.
Prevention / Solution
See the instructions for lighting
the grill in the "Operation"
section.
Make sure valves are
positioned inside of burner
tubes.
Ensure burner tubes are not
obstructed with spider webs or
other matted, see "Cleaning
and Maintenance"section.
Make sure the gas cylinder
not empty, refer to "Sudden
drop in gas flow" (below).
Turn control knobs to "OFF"
and disconnect coupling nut
from gas cylinder. Reconnect
and retry.
Turn the coupling nut
approximately onehalf to
three-quarters.
EN
51