Stopping The Utred30-Wifi; Automatically; Manually - LogTag Recorders UTRED30-WiFi Product User Manual

Stopping the UTRED30-WiFi

Stopping the UTRED30-WiFi

Automatically

The UTRED30-WiFi automatically stops recording temperature when the maximum
number of readings specified during configuration has been reached. Your unit can also be
set up to stop automatically when it is downloaded. This option needs to be set up at the
factory and cannot be changed during configuration with LogTag
distributor can supply more information about this option.

Manually

You can configure a UTRED30-WiFi so it can be stopped with the
This feature is useful when you take the logger out of a shipment and don't want to falsify
the statistics with readings taken after the shipment completion. The stop function is
enabled in the Advanced Settings
stop the unit:
Press and hold the
is shown in addition to the
STOPPED
Keep holding the button until the
disappears, then release the button within 2
seconds.
is shown permanently on the display and
STOPPED
the logger will no longer take readings.
tab during configuration. When enabled, following will
button.
START
/CLEAR/STOP
UTRED30-WiFi User Guide
symbol.
symbol
®
Analyzer. Your
button.
START
/CLEAR/STOP
62