Philips S5588 Manual page 19

Replacing the Quick Clean Pod Cartridge (specific models
only)
Frequency of use
Every day
A few times per week
Every week
Every month
Always shake excess water off the shaver before you
place it in the Quick Clean Pod.
Place the shaver upside down into the Quick Clean
1
Pod. The shaver automatically detects that it is in
the Quick Clean Pod.
2 Switch on the shaver to start the cleaning program.
Each cleaning program takes approximately one
minute. During the cleaning program the cleaning
symbol lights up continuously and the blue icon
pulses.
The shaver handle vibrates twice quickly when the
cleaning program is finished.
3 Let the shaver air-dry completely in the Quick
Clean Pod before storing it.
Replace the Quick Clean Pod Cartridge immediately
when the cartridge replacement icon on the Quick
Clean Pod becomes visible or follow the table below.
Cycles
About 30
About 20
About 13
About 3
Twist and remove the top of the Quick Clean Pod.
1
English
When to replace the
Quick Clean Pod
Cartridge
Every month
Every 2 months
Every 3 months
Every 3 months
19