Philips S5588 Manual page 18

18
English
Using the Quick Clean Pod (specific models only)
3 Lift the tab on the seal and pull it by the corner to
remove the seal from the Quick Clean Pod
Cartridge.
4 Press the small circular piece on the handle of the
Quick Clean Pod Cartridge to break the snap hook
on the handle.
5 Place the Quick Clean Pod Cartridge into the Quick
Clean Pod.
6 Put the top of the Quick Clean Pod back onto the
base and turn it clockwise until you hear a click.
Do not tilt the Quick Clean Pod to prevent leakage.
Note: If you use the shaver with shaving foam, shaving
gel or pre-shave products, thoroughly rinse the
shaving heads before you use the Quick Clean Pod
(see 'How do I clean my appliance and the
attachments?').