Removing The Right-Side Cover; Installing The Rack-Adapter Plate - Dell PowerEdge 1800 Supplementary Manual

Figure 1-4. Removing the Right-Side Cover
2
Install the rack-adapter plate:
Align the 12 securing tabs on the rack-adapter plate with the 12 securing slots on the
a
chassis. See Figure 1-5.
Slide the rack-adapter plate toward the front of the system.
b
Replace the two back-panel screws to secure the rack-adapter plate to the chassis.
c
Figure 1-5. Installing the Rack-Adapter Plate
securing slots (12)
Installing the Tower-to-Rack and Rack-to-Tower Kits
right-side cover
back-panel
screws (2)
rack-adapter
plate
back-panel
screws (2)
9