Removing The Rack Handles; Attaching The Side Cover - Dell PowerEdge 1800 Supplementary Manual

Removing the Rack Handles

Remove the three hex-head Phillips screws that secure each rack handle to the chassis. See
Figure 1-10.
Figure 1-10. Removing the Rack Handles

Attaching the Side Cover

1
Remove the rack-adapter plate:
Remove the two back-panel screws that secure the rack-adapter plate to the chassis. See
a
Figure 1-11.
Slide the rack-adapter plate toward the back of the system and then lift it away from the
b
chassis.
rack handles (2)
Installing the Tower-to-Rack and Rack-to-Tower Kits
hex-head Phillips
screws (6)
13