Setting Up Recirculation Mode - Miele DA 3668 Operating And Installation Instructions

 Attach the exhaust ducting to the
exhaust connection on the cooker
hood.
 See "Exhaust ducting" for more
detailed instructions on fitting the
exhaust ducting.

Setting up recirculation mode

If site conditions are not suitable for the
cooker hood to be used with an
exhaust duct, the cooker hood must be
set up for recirculation mode. A
conversion kit, available through your
dealer or from Miele, is required to
operate the cooker hood in recirculation
mode. You will also need an charcoal
filter (see "Technical data").
Conversion kit DUU 150 with a plastic
grille is suitable for fitting in a non-
visible area at the top of the wall unit.
Conversion kit DUU 151 with a stainless
steel grille is recommended if the grille
is to be fitted in an area which is visible.
 Fit the conversion kit as described in
the installation instructions supplied
with it. Make sure that the slats in the
exhaust grille point towards the
centre of the room and not towards a
wall or the ceiling.
 Fit the charcoal filters (see "Cleaning
and care").
Installation
49