Tuning Analogue Television Stations - Grundig VISION 3 26-3830 T Manual

SETUP
System BG
Channel C 03
Fine tuning 0
a s
Search
Program no P01
Store
Autoprogram
G G
0 - 9
Back
SETUP
System BG
Channel C 03
Fine tuning 0
a s
Search
Program no P01
Store
Autoprogram
Search
Back
SETUP
System BG
Channel C 03
Fine tuning 0
a s
Search
Program no P01
Store
Autoprogram
Store
Back
36
SPECIAL SETTINGS

Tuning analogue television stations

These settings are only necessary if you can not receive digital
stations. The television channel can be set directly or using the
search.
Switching the television to analogue channels
1
Open the »SOURCE TABLE« menu by pressing »AV«.
2
Select the »ANALOG TV« signal source with »P+« or »P-« and
press »OK« to confirm.
Note:
Additional operations are explained in the following sections.
Setting channels using the search
1
Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
2
Select »Setup« with »P+« or »P-« and confirm with »OK«.
– The »SETUP« menu appears.
3
Exit
Select »Program no« with »P+« or »P-« and set the preset chan-
nel with »
4
Select »Search« with »P+« or »P-« and start the search with »
3
or »
– If a strong station signal is received, the search is interrupted
and the picture appears. Repeat the search until the channel
you want appears on the screen.
Note:
The current system is automatically displayed in the »System« line.
Select »System« with »P+« or »P-« if the colour or sound are in-
Exit
correct. Select the setting required with »
5
Select »Store« with »P+« or »P-« and confirm with »
– The »Stored« message appears.
Note:
To set other television stations, repeat steps
6
Press »i« to finish the setting.
Exit
4 3
« or » «.
«.
------------------------------------------------------------------
4 3
« or » «.
4
« or »
3 to 5.
4
«
3
«.