PICTURE
Brightness
Contrast
Colour
Sharpness
DNR
Mid
Colour Temp.
Normal
Back
SOUND
Volume
Balance
Sound type
Stereo
Sound Mode
Normal
AVL
Off
Equalizer
Headphones
Back
16
SETTINGS
Picture settings
1
Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
2
Select »PICTURE« with »P+« or »P-« and confirm with »OK«.
– The »PICTURE« menu appears.
3
Select »Brightness«, »Contrast«, »Colour«, »Sharpness«, »DNR«
or »Color Temp.« with »P+« or »P-«.
4
Press »
Exit
5
Press »i« to finish the settings.
Audio settings
1
Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
2
Select »SOUND« with »P+« or »P-« and confirm with »OK«.
– The »SOUND« menu appears.
Volume
1
Select »Volume« with »P+« or »P-« and adjust the setting with
4
»
« or »
Balance
1
Select »Balance« with »P+« or »P-« and adjust the setting with
Exit
4
»
« or »
Stereo / two channel, mono
If the device receives two channel programmes, e.g. a film with the
original sound on sound channel B (display: »Dual II«) and the
dubbed version on sound channel A (display: »Dual I«), you can
select the sound channel you desire.
If the device receives stereo or Nicam programmes, it switches
automatically to stereo sound (display: »Stereo«).
You can switch the sound to »Mono« if the stereo reception
quality is poor.
1
Select »Sound type« with »P+« or »P-« and adjust the setting with
4
»
« or »
----------------------------------------------------------------------------------------------------
4
3
« or »
« to select the level.
3
«.
3
«.
3
«.