Dell PowerVault 705N Install Manual page 29

support.dell.com
1. Lift the front door into position and align the hinges with the holes in the rack
(see Figure 1-5).
2. Line up the door hinges and then press them down.
3. Close the door latch by rotating the handle counterclockwise until it stops, and
then push the handle in until it locks in position (see Figure 1-4).
4. Repeat steps 1 through 3 to install the back door.
This completes the four-post rack kit installation.
Dell PowerVault 705N Rack Installation Guide 1-15