Dell PowerVault 705N Install Manual page 26

1-12 Dell PowerVault 705N Rack Installation Guide
1. Pull the two interior slide assemblies out of the rack until they lock in the
extended position.
2. Lift the system into position in front of the extended slides.
Grasp the system with one hand on the right side of the system and the other
hand on the left side of the system.
3. Align the inner rails you installed on the sides of the system with the open por-
tion of the slide assemblies (see Figure 1-10).
4. Push the system into the slide assemblies until the system stops (see
Figure 1-10).
inner rail
captive thumbscrews (2)