Dell PowerVault 705N Install Manual page 25

support.dell.com
To install the inner rails to the sides of the system, perform the following steps.
1. Place the system on its side on a piece of foam or cardboard (to prevent damage
to the system) while you install the inner rails to the sides of the system (see
Figure 1-9).
mounting bracket
2. Secure each inner rail to the side of the system with two 10-32 x 0.375-inch
pan-head Phillips screws (see Figure 1-9). Use the mounting holes as shown in
Figure 1-9.
3. Secure both mounting brackets to the system with two 10-32 x 0.375 screws.
10-32 x 0.375-inch pan-
head Phillips screws
Dell PowerVault 705N Rack Installation Guide
inner rail (2)
1-11