Advertisement
Broschüre
13.08.2007
7:51 Uhr
Connect the heater only to power sockets that have been installed by a concessionary electrician. For
best possible protection of persons and facilities a safety protector switch (FI) 30 mA is mandatory.
8. When the desired temperature has been reached, disconnect the plug from the power socket and leave
the heater for about one more minute within the liquid.
9. Unplug the heater before taking it off the liquid.
10. The heating element remains hot for a certain period in time even after disconnecting he plug and should
neither be touched nor put onto combustible surfaces.
11. The unit has to be cleaned after each and every use.
12. Do not leave the unit totally unobserved.
13. All repair work, e.g. the exchange of the connection lead may only be carried out through Lister GmbH or
an authorized specialist.
Seite 15
2
7
11
max
14
Lister
EN
Advertisement
