Nibe F1245 User Manual page 60

affect pool temperature (accessory is required)
Here you set whether pool temperature should be affected when activating "SG
Ready".
With low price mode on "SG Ready", the desired pool temperature (start and
stop temperature) is increased by 1 °C.
With over capacity mode on "SG Ready" the desired pool temperature (start and
stop temperature) is increased by 2 °C
SMART PRICE ADAPTION™
Menu
4.1.6
activated
This function can only be used if you
have an hourly tariff agreement with
your electricity supplier that supports
Smart price adaption™ and you have
an activated NIBE Uplink account.
area
Here you select where (which zone) the heat pump is set-up.
Contact your electricity supplier to find out which zone digit to enter.
affect room temperature
Setting range: 1 - 10
Factory setting: 5
affect hot water
Setting range: 1 - 4
Factory setting: 2
60 Chapter 3 | F1245 – at your service
NOTE
The function must be connected and activated in your F1245.
smart price adaption 4.1.6
activated
price of electricity
overview
area
affect room temperature
affect hot water
NIBE F1245