Axis P3807-PVE User Manual page 8

AXIS P3807-PVE Network Camera
Additional settings
Note
• WDR can cause artifacts in the image.
• WDR may not be available for all capture modes.
1. Go to Settings > Image > Wide dynamic range.
2. Turn on WDR.
3. Use the Local contrast slider to adjust the amount of WDR.
4. If you still have problems, go to Exposure and adjust the Exposure zone to cover the area of interest.
Find out more about WDR and how to use it at axis.com/web-articles/wdr.
Hide parts of the image with privacy masks
You can create one or several privacy masks to hide parts of the image.
Image without WDR.
Image with WDR.
To watch this video, go to the web version of this document.
www.axis.com/products/online-manual/37249#t10106902
How to create a privacy mask
8