Table of Contents
Advertisement
global_main.book.book Page 26 Thursday, July 2, 2020 4:09 PM
EN
26
OPERATION
Soak
• Soak can be selected to wash heavily soiled
laundry by soaking in water for some time to
remove dirt and grime.
• When the soak is activated, the
illuminates.
• To activate the Soak option, press and hold
the Soak button.
• To change the soak time on the display or
deactivate the Soak option, press the Soak
button while the Soak option is activated.
NOTE
• While the Turbo Wash option is activated, the
Soak option can not be set even if the Soak
button is pressed.
Hot Wash / Cold Wash
Press the Hot Wash and/or Cold Wash buttons to
select hot water, cold water, or hot and cold water
(warm water).
• If Hot Wash is selected, washing will be done
with hot water and rinse will be done with cold
water.
• Under normal and standard user environments,
warm water will enter the drum when both hot
water and cold water are selected.
• It can be changed during operation.
NOTE
• Allergy Care programme has higher set
temperature. So this programme uses more hot
water than other programmes.
• Both Hot Wash and Cold Wash buttons are
automatically selected under the Allergy Care ,
Smart Rinse ,
Stain Care
programmes.
Setting
Child Lock
Use Child Lock function to disable the controls.
This function can prevent children from changing
programmes or operating this appliance.
NOTE
• Once this function is set, all buttons are locked
icon
u
• When the controls are locked,
• Turning off the power will not reset this function.
Locking the Control Panel
1
2
Unlocking the Control Panel
1
2
and Tub Clean
except the POWER button.
remaining time are alternatively shown on the
display during the wash while the child lock is
engaged.
You must deactivate this function before you can
access any other options and functions.
Turn on the power.
Press and hold the Strong Wave button for 3
seconds to activate this function.
Turn on the power.
Press and hold the Strong Wave button for 3
seconds to deactivate this function.
• When this function is deactivated, a beeper
will sound and the remaining time for the
current cycle will reappear on the display.
and the
CL
Advertisement
Table of Contents
