Table of Contents
Advertisement
global_main.book.book Page 13 Thursday, July 2, 2020 4:09 PM
Assembling the Anti-Rat Cover
You can insert the anti-rat cover according to the
type to protect the appliance from the rat.
Folding Type
1
Lay the appliance backwards.
CAUTION
• Be careful your feet or hands when you lay or
raise the appliance.
2
Remove the sponge attached on the base.
3
Insert the 8 screws
into the holes to
a
assemble the anti-rat cover to the appliance.
CAUTION
• If the power is supplied from a cord extension
set or generator, the cord extension set or
electrical portable outlet device should be
positioned so that it is not exposed to splashing
or ingress of moisture.
INSTALLATION
13
EN
Advertisement
Table of Contents
