Table of Contents
Advertisement
global_main.book.book Page 24 Thursday, July 2, 2020 4:09 PM
EN
24
OPERATION
Number of washing cycles
Water Consumption during washing
*2
cycle (liter)
Duration of each washing Cycle
(minutes)
Number of rinse cycles
Water Consumption of each rinse cycle
*2
(liter)
Duration of each rinse cycle (minutes)
Number of spin cycles
Duration of each spin cycle (minutes)
Extra Options and
Functions
You can use the extra options and functions on
some programmes to customize the cycle.
• The extra options and functions can be changed
when the START/PAUSE button is pressed
during operation depending on the selected
programmes, options and functions.
Customising a Washing
Programme
Each programme has default settings that are
selected automatically. You may also customise
these settings using these buttons.
Water Level
This appliance detects the amount of laundry
automatically, then sets the water level. However,
manually increasing the water level may be
required and recommended to avoid linting and
unbalanced errors when the load is bulky but
lightweight.
• Press Water Level option to adjust water level.
Standard 60 ℃ Normal programme
Full Load
Half Load
1
124
255
2
12/92
5/20
1
9
• When you select a wash programme, the water
level will be shown on the control panel.
• When water level is automatically detected, it
may differ depending on the amount of laundry
even though the same water level is indicated on
the control panel.
Wash
Adjusting the wash time setting modifies the cycle
times and/or wash actions.
• Press Wash button until the desired wash time is
selected.
Rinse Times
Use this option to change the number of rinses.
• Press Rinse Times button to change the number
of rinses.
• When the Rinse Times option is selected,
icon is lit.
• If selecting the maximum number of rinses, then
this option is deactivated.
Standard 40 ℃
Normal
programme (Half
Load)
1
1
120
120
253
253
2
2
15/88
15/86
5/18
5/18
1
1
9
9
l
Advertisement
Table of Contents
