Hisense DH3020K1W Use & Care Manual page 7

Control Panel
NOTE:
The control panel of your model may differ from
the one shown above.
The dehumidifier should be
upright for at least 2 hours before use.
NOTE:
■ Before turning on the dehumidifier, be sure that
the bucket is empty and fits all the way into the
dehumidifier.
■ Each time you unplug the dehumidifier or power
is interrupted, the controls will return to the
previous settings when power is restored.
■ Humidity displayed is between 30% Relative
Humidity and 90% Relative Humidity.
■ Humidity can be set between 30% Relative
Humidity and 80% Relative Humidity.
■ It's important to set the desired humidity level
to an achievable setting. To ensure energy-
efficient operation, only use the dehumidifier in
a closed space, with no open windows or other
sources of moist air (to avoid continuous running).
■ Operating temperature is between 38ºF to 90ºF
(3.2ºC to 32.2ºC).
At temperatures of 38ºF(3.2ºC) or less,
water freezes inside the product. At
temperatures over 90ºF(32.2ºC), the internal
temperature of the product trips a protective
device which deactivates the product to avoid
product damage.
■ The compressor has a 3-minute delay
before restarting. If the product is stopped
and immediately restarted, to protect the
compressor there is a 3-minute delay until
the compressor restarts.
■ W
hen the dehumidifier is operating the
indoor temperature will rise
The dehumidifier does not have a cooling
/
heating function
Heat is generated during operation so the
room temperature may be increased by
(
about 6ºF 3ºC depending on the usage
(
conditions indoor temperature size of the
).
room
1. Plug into a grounded three-prong outlet.
2. Press POWER to turn on the dehumidifier.
3. Press the plus or minus button to set the
level of humidity.
4. Press POWER to turn off the dehumidifier.
NOTE:
In the case of a power outage or interruption, the
dehumidifier will automatically restart, in the
settings last used, after the power is restored.
6
.
.
)
,
,
,