Advertisement
Installation
STEP 4:
Attach TV harness to television
A. Locate the top pair of "VESA" mount screw holes
on the back of the television.
B. The TV harness (B) includes a pair of mounting
bars connected by a cable. The mounting bars
have holes indicated at 200, 300, 400, 500 and 600
mm spacing. Line up the bars with the "VESA" mount
screw holes that match.
c. Your Wall Mount is supplied with several sets of
machine screws (E, F, G, H, I, J, K, L and M). These
cover in a range of diameters and lengths. consult
your TV's operating instructions to find screws of the
right size and depth to fit your television. Pair these
screws with the supplied washers of the appropriate
size. (Screws E, F and G use washers n. Screws H, I, J,
K, L and M use washers O.)
D. With the numbers on the mounting bars facing
you, use a Phillips screwdriver to attach the TV
harness to the television.
STEPS 4 & 5
8
(cOnTInuED)
STEP 4
(continued)
CAUTION! Do NOT use a power drill to attach the
mounting bars to the television.
CAUTION! If the screws are too loose, the TV may
fall and cause injury or property damage. If they
are over-tightened, they may break and cause
injury or property damage.
STEP 5:
Attach spacers or self-adhesive pads
A. If you want the television to sit parallel to the wall,
install the spacers (c) with the supplied machine
screws. Your Wall Mount is supplied with several sets
of machine screws (parts E, F, G, H, I, J, K, L and M).
These cover in a range of diameters and lengths.
consult your TV's operating instructions to find screws
of the right size and depth to fit your television.
Pair these screws with the supplied washers of the
appropriate size. (Screws E, F and G use washers n.
Screws H, I, J, K, L and M use washers O.)
8mm – 12mm
✓
CAUTION! Excessively long
screws can damage the
television housing, causing injury
or property damage. Check your
TV owner's manual for proper
screw depth.
BACk OF TV
✗
Advertisement
