Silvercrest STC 920 C2 Operating Instructions Manual page 25

Setting up
CAUTION! RISK OF FIRE
► You should therefore NEVER locate the appliance close to or underneath
inflammable objects, especially not under curtains or suspended cupboards.
Unwind the cable completely from around the cable winder 9 and lead it
■
through the cable clamp 1.
■ Place the appliance on a level and heat-resistant surface.
■ Insert the plug into a mains power socket.
NOTICE
► When the toaster is not in use, always remove the plug from the mains power
socket. This is the only way to ensure that the appliance is current-free.
Before taking into use
■ Operate the toaster without bread for 3 times at the maximum browning
level "6".
■ Afterwards, clean the toaster as described in the chapter "Cleaning".
NOTICE
The operating button 8 only engages when the cable is connected to a
►
mains power socket.
► With the first usage a slight smell can arise (minimal smoke development is
also possible). This is normal and dissipates after a short time. Provide for
sufficient ventilation. For example, open a window.
Operation
Adjusting the browning level
The desired level of browning, from "light" (1) to "dark" (6), can be adjusted
infinitely with the toasting dial 2.
Toasting
CAUTION! RISK OF FIRE!
Do not cover the toasting slots 7 when the appliance is in operation.
►
There will be a risk of fire! The appliance could be irreparably damaged!
│ GB │ IE
■ 22 STC 920 C2