Table of Contents
Advertisement
UK
INSTALLATION
• After unpacking, visually inspect the battery appearance to see if there is
any collision damage during transportation
• The battery installation area shall be well ventilated, away from water,
combustible gas, corrosion agent and other dangerous goods, the
installation environment shall meet the requirements of product
specifications�
• Avoid placing on the side� Do not squeeze or tread�
• When the battery charging and discharging with same line, only need
connect the charger or electrical equipment with the positive and negative
terminal� Do not charge and discharge at the same time�
MAINTENANCE
• Half electric storage, long-term power shortage will affect battery life�
When the battery power is insufficient, it should be charged in time, which
will be beneficial to prolong the battery life�
• If the battery is not used for a long time, it is recommended to charge it
every three months�
• The battery shall be installed in a dry and clean environment with
air circulation� To avoid the fire source and inflammable materials
approaching and disconnecting the load (turn off the electric equipment)
when charging�
• The best working environment temperature of the battery is 15 – 35°C�
If the temperature is outside this range, it may have an impact on the
performance of the battery� The visual representation is the change of
battery capacity, or the change of equipment operation time, which is a
normal phenomenon�
CONFIGURATION OPTIONS
We don't recommend to connect several modules in series or parallel, we
suggest single module usage� Please do not build battery banks!
ATTENTION!
Do not connect the modules to battery modules of other chemistries or 12
V battery modules of different capacities� For example, do not connect a
12 V 100Ah LiFePO4 battery to a lead-acid 12 V 100Ah or a LiFePO4 12 V
20/60 Ah�
Carbest LiFe PO4 Batterie | Battery 81238/81239
5
Advertisement
Table of Contents
