Carbest 81238 User Instruction page 31

Life po4-battery 12 v
Table of Contents

Advertisement

UK
81239
SAFETY DATA SHEET
Safety Data Sheet according to Directive 1907/2006/EC, Article 31, Annex II, and TRGS 220 (Germany)
Product name: LiFePO4 Battery 12V/200Ah
Date of issue: 30 March, 2020
Date of last revision:
Extinguishing agents:
Not suitable extinguishing
agents for safety reasons:
Special hazards:
Special protective
equipment for fire-fighters:
Further notice:
SECTION 6:
Accidental Measures after Release of Ingredients
General information:
Personal precaution:
Environmental precaution:
Methods for cleaning up:
SECTION 7:
Handling and Storage
Handling:
Under no circumstances, do not open the housing, do not throw the battery into fire,
prevent the battery from heating-up and from direct sunlight, do not cause short
circuit. If the battery becomes hot (< 80ÅC), remove it to a safe place or at least try to
cool the battery, but take care of the possibility of a short circuit by water, if the
battery is loaded. If the battery is heated above 80ÅC leave the endangered area
immediately and warn co-workers (refer to SECTION 5, „Special hazards", and
SECTION 6, „Personal precaution"). Prevent battery from exceeding vibrations.
Carbest LiFe PO4 Batterie | Battery 81238/81239
Carbon dioxide, foam, dry chemical. Use water spray only if the housing
is tight and the battery is not loaded to prevent short circuit.
Water jet. Water in general, if the housing is damaged or the battery is
loaded and is not protected against short circuit.
In case of burning the battery might explode! In case of exposure above
80ÅC or in case of damage of the housing, the battery may leak or spout
vaporized electrolytes or their decomposed products, such as very toxic
fluorides and hydrofluoric acid, hydrocarbons, carbon monoxide and
phosphorous oxides. The electrolytes are partly inflammable and may
cause serious eye damage and severe skin burns by contact or by
aerosols, and severe irritation of the respiratory tract by inhaling aerosols
or by inhaling vapours specially when the product is burning.
Use self-contained breathing apparatus and protection clothes.
In case of fire in the surroundings immediately remove battery to a safe
place or at least try to cool the battery, but take care of the possibility of
a short circuit by water.
Only if the battery is damaged and ingredients are set free or after a
short circuit , accidental measures may be necessary.
Leave the endangered area immediately and warn co-workers. Ventilate
the area until aerosols and vapours are gone before entering the area
with protective clothing, chemical resistant gloves (refer to SECTION
8.3) and safety goggles with side shield. Otherwise use fine dust respira-
tor (P3, identification colour: white) or a ventilated breathing hood.
Do not let the ingredients enter surface water, groundwater or soil.
Prevent large amounts of ingredients from entering the sewage system.
Prevent generation of aerosols. Pack solid parts into container to be
labelled. Take up liquids with liquid-adsorbent material (sand, clay, cat
litter, etc.). Fill contaminated adsorbent material into container. Finally
clean area with water and soap. Discharge contaminated material
according to SECTION 13.
31
Page 4/ 14

Advertisement

Table of Contents
loading

This manual is also suitable for:

81239

Table of Contents